How to maintain the electric bicycle? - Enterprise Consultation - Electric Bike,Folding Electric Bike,Electric Tricycle-Jinhua seno technology co.,ltd.

Jinhua SENO Technology co.,ltd Get Where You‘re Ging, Only Faster

How to maintain the electric bicycle?
August 23,2022

Pay attention to cleaning first, and clean in time after encountering water, especially salt water in winter (many cities spray salt water after heavy snow in winter to avoid freezing). Otherwise, it is easy to cause corrosion of metal parts and aging and peeling of paint film. Second, pay attention to the maximum adjustment height. After riding a new car for a period of time, the whole car shall be inspected and adjusted according to the requirements of the manual. At this time, fastening and lubrication are essential. Check whether the fasteners are loose and whether the transmission parts are flexible. Note that the floating oil shall be wiped off after the chain is lubricated with oil, and the flywheel can be lightly oiled. The tire inflation should be appropriate, otherwise the riding comfort and service life will be affected. The brake is the basic guarantee of safety, and it should be checked at any time. If any problem is found, it should be adjusted or repaired immediately.

1. Before using the electric bicycle, the height of saddle and handlebar shall be adjusted to ensure riding comfort and reduce fatigue. The height of saddle and handlebar shall be different from person to person. Generally, the height of saddle is suitable for the rider to be able to land reliably with one foot (the whole vehicle shall be kept upright basically), and the height of handlebar is suitable for the rider to put his forearm flat and relax his shoulder and arm. However, the adjustment of saddle and handlebar shall first ensure that the insertion depth of pipe passing and handlebar riser must be higher than the safety mark line.

2. Check and adjust the front and rear brakes of the electric bicycle before use. The front brake is controlled by the right brake handle, and the rear brake is controlled by the left brake handle. The adjustment of the front and rear brakes is suitable for reliable braking when the left and right brake handle reaches half the stroke; If the brake shoe is excessively worn, it shall be replaced in time.

3. Check the tightness of the chain before the electric bicycle works. If the chain is too tight, the pedals are laborious. If the chain is too loose, it is easy to vibrate and rub other parts. The sag of the chain is 1-2mm, which can be adjusted properly when riding without pedals. When adjusting the chain, loosen the rear wheel nuts first, screw out the left and right chain adjusting screws evenly, adjust the chain tightness, and re tighten the rear wheel nuts.

4. Check the lubrication of the chain before using the electric bicycle. Feel and observe whether the chain shaft rotates flexibly and whether the chain links are seriously rusted. In case of corrosion or inflexible rotation, appropriate lubricating oil shall be added, and the chain shall be replaced in case of serious.

5. Before riding an electric bicycle, check whether the tire pressure, handlebar steering flexibility, front and rear wheel rotation flexibility, circuit, battery power, motor working condition, lighting, horn, fasteners, etc. meet the use requirements.

Share to:

Jinhua SENO Technology co.,ltd Get Where You‘re Ging, Only Faster

Home

Electric Bicycles

Electric Tricycles

About Us

News

Contact Us